Understanding

How to Find Hidden Piping and Valves

Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.

In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. The shutoff valves of such systems are usually located near the water heater or the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

Automatic valves for your sprinkler system may in most cases be located underground and are usually harder to find as you read more from this website. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.